FF (Form Feed) button

This button is effective only when the SQ-2000 is in the offline state. When you press the FF button in the off-line state, the paper is advanced to the next top of form.

LF (Line Feed) button

This button is effective only when the SQ-2000 is in the offline state. When you press this button in the off-line state, the paper is advanced by a single line according to the current line spacing value. If you hold down the switch, the paper continues to advance.

Note:

To advance the paper a number of lines, use the FF and/or paper feed knob. Pressing the LF switch continuously will shorten the life of the motor.

CLEANING button

This button is effective only when the SQ-2000 is in the offline state. When you press the button at that time, the inside of the print head is cleaned. Further details of cleaning are given in Chapter 4.

SHEET FEED button

This button is effective only when the SQ-2000 is in the offline state. When you press the button in the off-line mode, the paper bail opens and a single sheet of paper is loaded.

The first printed line is about one inch below the top edge of the form.

25