Figure 1-6. Installing the single-sheet paperguide

4 Setting Up the Single-Sheet Paper Guide

You’ll use the single-sheet paper guide to feed individual sheets of paper into the SQ-2000.

To install this guide, hold the guide in both hands, facing the front of the printer.

With the guide tilted away from you, lower its two notched feet into the two slots shown above.

At the back of each slot is a round horizontal bar. Place the notches in the guide’s feet on these two bars.

Then tilt the guide toward you and press gently until it locks into place with a click.

To remove the guide, press on the two locking levers and tilt the guide away from you. Then lift it free of the printer.

10