VIPER Technical Manual

Introduction

 

 

•Wind River VxWorks 5.5 development kit Features of this kit are:

-400MHz PXA255 processor with 64MB DRAM & 32MB Flash memory.

-VxWorks BSP for Tornado 2.2.1/VxWorks 5.5.1/Wind ML 3.0.2.

-Pre-configured build of VxWorks, tailored specifically for the VIPER, pre-loaded into the 32MB Flash.

-Rugged enclosure with optional NEC35HQ-VGA TFT colour display and analogue touchscreen.

-Uninterruptible power supply (VIPER36H-UPS)to allow VIPER system to continue to operate without main power.

-24V power supply module with power cords for US, UK and European power sockets.

Entry level development kits for VIPER or VIPER-Lite

The following entry level development kits are available:

•Windows CE / CE 5.0 development kit Features of this kit for VIPER or VIPER-Lite are:

-400MHz (VIPER) or 200MHz (VIPER-Lite) PXA255 processor with 64MB DRAM

&32MB Flash memory.

-Pre-configured build of Windows CE 5.0 tailored specifically for the VIPER, pre- loaded into the 32MB Flash.

-+5V PSU.

-All cables for immediate operation and download.

-Development kit documentation.

-Optional VIPER-I/O module.

•Embedded Linux development kit

Features of this kit for VIPER or VIPER-Lite are:

-400MHz (VIPER) or 200MHz (VIPER-Lite) PXA255 processor with 64MB DRAM

&32MB Flash memory.

-Pre-configured build of Eurotech Ltd’s Embedded Linux, tailored specifically for the VIPER, pre-loaded into the 32MB Flash.

-+5V PSU.

-All cables for immediate operation and download.

-Development kit documentation.

-Optional VIPER-I/O module.

© 2007 Eurotech Ltd Issue E

11