
10.Pattern Operation (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras)
a.Click “Pattern” button
11.Steps to run a tour
a.Click “Tour” button
b.Click the number of the desired tour
c.Click “Go” button
12.Steps to remove a tour (if supported by the camera)
a.Click “Tour” button
b.Click the number of the desired tour
c.Click “Delete” button
Click “C” to clear the digit in the number display
Click “X” at the
REMEMBER:
Click “X” at the
“X” only HIDES the PTZ control panel. “EXIT” closes the panel and exits PTZ mode!! Other controls will not respond until you EXIT the PTZ mode!!
3.6.2Express Control of PTZ
If the PTZ control panel/menu has first been opened and then hidden, the mouse can be used to control basic PTZ functions (Quick Mouse Control). The mouse cursor will change to different icons in different areas of the screen. With Quick Mouse Control, the user can control PTZ direction, zoom, and focus by clicking directly on screen. The screen is divided into 16 areas, with the outer ring is divided into 12 zones used to control movement direction. The inner square of 4 areas is used to control zoom and focus.
32