EverFocus 22HH1144 user manual Camera Menu Motion Grid Setting

3.Select the grid square in the lower-right of the desired rectangle.

4.The area between upper-left and lower-right grid will be selected. The same result is achieved from lower left followed by upper right.

5.Choose “Save & Back” to proceed.

How to select motion grid by front panel:

1.Press Enter key on “Grid Setting” to launch motion grid setting page. .

2.Use arrow keys to scroll above or below list of buttons to enter the grid setting area.

3.Press Enter key to display grid.

4.Use arrow keys to choose one corner of desired area

5.Press Enter key at the starting point.

6.Use arrow keys to select motion area; the shape of the proposed area will be displayed.

7.Press Enter key at the end point, and the area will be selected.

8.Press the Menu key to exit the area selection; use the up/down arrows to choose “Save & Back” and press Enter to proceed.

Figure 4-5 Camera Menu – Motion Grid Setting

Apply To: This button can be used to copy the motion settings to other cameras. Select which cameras you wish to copy to. "Select All" selects all cameras, “Unselect All” deselects all cameras. Click “OK” to copy the settings or "Cancel" to exit without copying.

53