EverFocus 22HH1144 user manual Rear Panel

1.5 REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel.

Figure 1-2 Rear Panel

1)Main POWER: Plug the 120~240VAC power source provided into the power socket.

2)ETHERNET: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack; Green LED means network is connected, amber LED flickers when data is being exchanged.

3)RS232 Connector: 9-pin D-Sub control input for RS-232.

4)RS485 Connectors: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices

9