EverFocus 264x4, 264x2 instruction manual Camera Menu Motion

5.3.3Motion

Figure 5-4 Camera Menu – Motion

Camera: Select the camera you wish to adjust. “Title” will change to the title name of the selected camera.

Enable: Check box to enable motion detection. Other motion options will not be available unless this feature is selected.

Log: Check box to record motion events in the log.

Main Monitor: Monitor display options when a motion event occurs.

No change: No change on the main monitor display.

Full screen: A full screen of the active camera will display on the main monitor. Call Monitor: Monitor display options when a motion event occurs.

No change: No change on the call monitor display.

Full screen: A full screen of the active camera will display on the call monitor.

Pre-alarm Record: Check box to record several moments before the motion event. (Pre-alarm recording rate will follow “Normal” frame rate setting)

Buzzer: Check box to enable buzzer when a motion event is triggered.

Email Notify: Check box to send email notification when a motion event is detected.

Network Alarm: Check box to send out a network alarm to client PC when motion occurs. (requires PowerCon software and setting up Alarm Server in Network Setup menu)

48