By front panel: Press any channel key to bring that channel to full screen mode.

4.8 CHANNEL SWITCHING

Use this function to change channel position

1.Select one camera

2.Press Channel button .

3.Click on the channel number you wish to switch on channel bar. The display of channel will be switched.

EX: Select camera1 and enter Channel menu and choose “2”, than camera1 will show on position of camera2, camera2 will show on position of camera1

4.9 DISPLAY

1.Press Display button on menu by using mouse or press “Display” button on the front panel.

2.Press once to show camera information. Please see the following table for status representation.

Recording

Playback

Fast forward

Fast backward

Back

pause

 

 

 

 

 

 

Alarm

Motion

Video loss

Express copy

Audio out

 

3. Press again to show status information. Please see the following table for status representation.

Alarm

Audio 1~16

Control call monitor

Event

Fan failure

HD failure

HD temp. too high

Monitor 1 status

Motion

New firmware

No network

Record in HD1

Record in HD2

Seq.

Video loss

 

 

 

33

Page 40
Image 40
EverFocus 264x2, 264x4 instruction manual Channel Switching, Display