ThinConnect4 <69>
4.4.2 Automatic disconnection
Setting the automatic disconnection. There are two types of setup available.
ll Non Activity Timers
ThinConnect4 will automatically disconnect when there is no communication for a
certain period of time.
You can setup the “Non Activity Timers” to monitor the transmitting and receiving
data separately.
ll Set Non Disconnect Timer Period
ThinConnect4 will automatically disconnect when the clock reaches the ending time.

Non Activity Timers setup

1. Enter the holding time you want to set (Between 10 seconds to 600 minutes)
in “Non Transmit Timer”.
2. Enter the holding time you want to set (Between 10 seconds to 600 minutes)
in “Non Receive Timer”.
Note: The default value is 3 minutes.
If you are connecting to a WEB site that is actively showing
advertisement or updated information, the Non-Activity-Timer will not
function.
• If you wish to setup the “Set Non Disconnect Timer Period”, continue on to the next
page.
• If you do not want to setup “Set Non Disconnect Timer Period”, click
“OK” and go to chapter 7 Advanced settings of LAN (Page97).