ThinConnect4 <49>
2. Enter your user ID and password ISP in “User Name” field and “Password” filed
respectively.
Note: For security purpose, the password will show as “****” whatever you
type in. To confirm the password entered please type in your password again in
the “Confirm Password” field.
3. Fill in the ISP dial-up numbers, in “Phone number #1 through
#3”. The “Phone number #1” is a primary number, # 2 and 3 are alternate numbers.
Note: Please key in the telephone number carefully. If the number is not correct,
ThinConnect4 will keep trying to dial those three numbers.
The Connection process
The Dial-Up Connection (connecting process) to ISP process triggered by user start an
Internet (Web Browser or Mail Software) application. If you have enabled the “Automatic
Connection”(4.4 Connection Timer Page 68) then through the configured serial port the
ThinConnect4 will initialize your MODEM/TA for dialing out. ThinConnect4 will send
commands to MODEM/TA to dial your first phone number “Phone Number #1”. If the line
is busy or cannot connect for some reason, MODEM/TA will reply “Cannot connect” and
ThinConnect4 will attempt to dial your second number “Phone number #2” (if one was
assigned). If “Phone number #2” cannot connect, ThinConnect4 will try to dial your third
phone number “phone number #3” (if one was assigned). If all three attempts fail, please
restart your Internet application again.