<84> ThinConnect4
3. When finishing your Call back setting, click the “Add” button.
The record will be added in the box.
Note: To edit or remove the listed record, please refer to page 86.
4. When all records have been listed, enter the “Ring Count”. ThinConnect4 will answer
log in requests after the “Ring Count” has been set (1 to 99, Default is set to 2)
when finished with the setting, click the “OK” button.
Note: If you have other telephone devices connected to the same line as the Modem,
please choose the “Ring Count” carefully. For telephones, the setting should be
higher than 2 (i.e. 15) so you have a chance to pick up the phone before the
Modem does.
If the settings between RAS Server and RAS Client are different, the
following combination of the setting will take effect.
(For following tables: NT 4.0 = Windows NT 4.0, Win 95 = Windows 95/98)

Windows 95 Dial-Up Connection

No Call back Preset in
RAS Server
Set by
RAS Client
Call back pop up
window is “OK”
Can connect at
"Preset in server"
Can connect at
"Set by client"
Call back pop up
window is “Cancel” Can not connect Can connect at
"No call back"
No pop up window
Can connect at
"No call back"
Win95 Client
ThinConnect4
Server