<120> ThinConnect4

7.4.3 Setup E-mail program
This section describes how to configure e-mail program for sending mail to ThinConnect4
user with the E-mail sharing function. Please ask the sender to set up e-mail program
according to following procedures:
In order to send mail to users, who are using an E-Mail sharing function, it is necessary
for the e-mail program to have either one of these two conditions or both, otherwise it will
not work.
• A program that allows user to enter an address in “User name”<E-mail account>
format in the “To” field. For example:
“John”<thinconnect4@expnet.com>
• A program which can set “User name”<E-mail account> in "To" field by “Address
book”.
Setup example of “Outlook Express” will be shown in below.
1. Click “Address Book” in “Tools” menu at startup window.
Click the “New Contact” button. The window below will be shown.
Enter the “User Name” registered in ThinConnect4 to "Display" field.
Enter the shared E-Mail address at ThinConnect4 to “Add New” field.
Click the “Add” button.
2. Click the “OK” button and close “Address Book”.
Note1: “John” will be shown in the address field at the time of sending
but actually mail will be sent to "John"<thinconnect4@expnet.com>.
Note2:The value in the above window is only for reference.
Please enter the appropriate setting to meet your environment.