<6> ThinConnect4

2.2 Your ThinConnect4
l Front Panel
Monitor LED: Shows ThinConnect4 working status.
S1 Light when serial port 1 is sending/receiving data.
S2 Light when serial port 2 is sending/receiving data.
L1 Light when 10BASE-T port 1 is confirming link or receiving data.
L2 Light when 10BASE-T port 2 is confirming link or receiving data.
L3 Light when 10BASE-T port 3 is confirming link or receiving data.
L4 Light when 10BASE-T port 4 is confirming link or receiving data.
PWR Light when ThinConnect4 is powered on.
l Rear of ThinConnect4 (Connectors)
T1 Port 1: Connects to Ethernet adapter or HUB through 10BASE-T cable.
T2 Port 2: Connects to Ethernet adapter or HUB through 10BASE-T cable.
T3 Port 3: Connects to Ethernet adapter or HUB through 10BASE-T cable.
T4 Port 4: Connects to Ethernet adapter or HUB through 10BASE-T cable.
S1 Serial Port 1: Connects to MODEM or TA.
S2 Serial Port 2: Connects to MODEM or TA.
9 VAC Power connector: Connects to the AC adapter in the package.
l Right Side of ThinConnect4
Power Switch: ThinConnect4 power on/off switch.

End of 2.2 Your ThinConnect4

PWR L1 L2 L3 L4 S1 S2
9VAC S2 S1 T4 T3 T2 T1
OFF ON