<74> ThinConnect4

5.1.2 Call Back Function
This section explains how to set up the call back function. The following are available
functions:
ll No Call Back
No Call back setting. (Page 76)
ll Call Back to “Preset in RAS Server”
Call Back requests to the telephone number, which has been preset at the RAS
server.
(Page 76)
ll Call Back of “Set by RAS Client to”
Call Back requests the telephone number specified in RAS client.
(Page 76).
Note: The call back function should be enabled on both RAS Server side and RAS
Client side. If the settings are different, ThinConnect4 will not connect.
The Call back function is not valid if RAS Server activated
with Windows 95-Plus! Dial-Up Server need to be set as “No Call
Back” in this section.