<100> ThinConnect4
Listing for filter setting
1. Enter a number in the “No” (number) field.
The entry number represents the IP filter processing priority, which number 1 is the
highest and number 64 is the lowest. There are five default values which have been
predefined for ThinConnect4.
For example: Enter number 6 if you want your setup at a lower priority than default
value. Enter number 1 if you can make your setup priority higher than the default
value.
Or any setting between 2 to 5 according to the priority. (Maximum entry 64)
2. Click “Add” button after entering an entry number.