<92> ThinConnect4

6.1 ISP Leased Line IP Connection
This section explains the setup for ISP Leased Line IP Connection.
Choose ISDN Leased Line beforehand in “3.3.8 Settings for MODEM/TA connection”.
(Page 40 to 44)
1. Click “Port Usage” Tab.
Choose “ISP Leased line IP Connection”.
2. Click the “OK” button.
3. Configuring “Detail Settings” is not required for “ISP Leased line IP connection”.
You can click “Cancel” to get out of the “Detail Settings” section.
Note: Use TA that matches your Leased Line connection.
In the “ISP Leased Line IP Connection” setting, the serial port
becomes a default gateway.
Please go to Chapter 7 Advanced settings of LAN (Page 97).

End of 6.1 ISP Leased Line IP Connection

ISP
Internet
Leased Line
ThinConnect4
xxx.xxx.0.1
255.255.255.0
TA
S2
S1
IP: xxx.xxx.0.2
IP: xxx.xxx.0.3
IP: xxx.xxx.0.4
IP: xxx.xxx.0.5 ISP Leased Line IP Connection
(Default Gateway)
IP = IP Address