ThinConnect4 <43>

Change Display

There are three buttons on the ‘Change Display’ to help you select and register a
Modem/TA with the ThinConnect4. The following are the button descriptions:
• “Default” button:
Shows the same list of the modem from My Computer ->Control Panel ->
Modem.
(Usually this is the default list, Window 95 only)
• “Browse” button:
Click to have the ThinConnect4 utility read the modem definition (*.inf file)
from a floppy disk or CD-ROM.
• “Windows” button:
Shows the standard Windows modem for Windows 95 / 98 or
Windows NT. If your modem has been installed in this PC, it will be listed.
If you are connected to “ISDN: Leased Line”, go to next step.
To add “Extra AT Commands” go to Page 44.
Otherwise, skips to 3.3.9 DTE speed Page 45.

ISDN: Leased line Dialing

For user who choose the “ISDN: Leased Line” in Selecting your telephone system type
(Page 40), make sure you enter proper AT command for your modem in “Dial Commands
for leased Line” field. Refer to your Modem/TA user manual. (Default value is ATDT0)