EXP Computer ThinConnect4 <32> ThinConnect4

<32> ThinConnect4
Changing and Verifying ThinConnect4 IP Address
If for any reason you wish to change and/or verify the ThinConnect4 IP address, you can do
so by starting the ThinConnect4 set up utility. From the window on page 27 step 4), click
the “Settings” button :
1. Click the “Settings” button in the LAN Port section.
2. In the window below, enter the IP Address and Subnet Mask you wish to use.
• IP Address: Enter ThinConnect4’s new IP address.
• Subnet Mask: The Subnet Mask of the network.