ThinConnect4 <83>
No Call back
• Uncheck “Accept Call Back” and leave it as it is.
Call back for “Set by RAS Client”
Check the “Accept Call Back” check box.
• Choose the “Set by RAS Client.
Call back to the number “Preset in RAS Server”
Check the “Accept Call Back” check box.
• Choose the “Preset in RAS Server to”.
• Enter the RAS Server’s phone number in “Phone Number” field.
Note: The telephone number above is just for reference only.
Please enter the actual number you want to used as call back.
Verify callback number you have entered. If the number is
not correct, ThinConnect4 will continue to dial the wrong number.
The call back settings should match on both RAS Server
side and RAS Client side. If the settings are different, ThinConnect4
will not be able to connect.