ThinConnect4 <127>
8.3 Copy Serial Port Settings
If you have successfully setup a serial port and want to duplicate all settings to the other
port, ThinConnect4 has this function for you.
1. If you want to copy settings of Serial port 2 to serial port 1.
Please click “Copy settings of serial port 2” button on “Enable Serial Port 1”
field.
2. If you want to copy settings of Serial port 1 to serial port 2.
Please click the “Copy settings of Serial port 1” button on “Enable serial port 2”
field.
Note: The Copy setting function will overwrite any previous setting.
If the serial port has been enabled before Copy setting, it will become disable.
For example, at the time the check mark is on the “Enable Serial
Port 1” and you click the“copy settings of serial port 2” button,
Serial port 2 settings will overwrite on serial port 1 and “Enable
Serial Port 1” the check mark will disappear from serial port 1.
End of 8.3 To Copy Serial Port Settings