ThinConnect4 <111>
2. Setting screen Syslog.
Setting up items
• Check box for “Enable Syslog Function”:
Place a check in this box to enable Syslog function.
• “Host IP Address”:
Enter a receivable “Host IP Address” of Syslog. The receivable IP address should
be the same as ThinConnect4, which means it must correspond to the LAN side
address of the same network. If you enter 255,255,255,255 the Syslog
event/information will be broadcasted to the LAN within the same segment of
ThinConnect4.
If you use syslog demon corresponding to broadcasting IP, you can receive syslog
with multiple PCs at the same time.
• “Facility Code”:
ThinConnect4 always use LOG_USER as the facility code and this setting is not
changeable.
• “Message Type”
Check the message type check box of each Syslog option.
At present, ThinConnect4 has two messages type available: “LOG_INFO” and
“LOG_WARNING”. In the future, more message functions will be added by
firmware version upgrade.
Note: At present, Syslog demon program services have not implemented. Contact
technical support for detail.