EXP Computer ThinConnect4 8.2 Return to Default

<126> ThinConnect4
8.2 Return to Default
This section instructs you how to load the factory default values.
1. Refer 3.3.1 Start ThinConnect4 Setup Utility (Page 25) to start up Setup Utility.
2. To load factory default value to serial port 1, click the “Return to default” button in
serial port 1.
To load factory default value to serial port 2, click the “Return to default” button in
serial port 2.
To load factory default value to LAN port, click the “Return to default” button in
LAN port.
End of 8.2 Return to Default