Extreme Networks 4700 manual Wall Mounting

Hardware Installation

the coverage area. Do not mount the access point in a location that has not been approved in a site survey.

Wall Mounting

Wall mounting requires hanging the access point along its width (or length) using the pair of slots on the bottom of the unit and the access point mounting template (on the next page) for the screws.

CAUTION

An access point should be wall mounted to concrete or plaster-wall-board (dry wall) only. Do not wall mount the access point to combustible surfaces.

The hardware and tools (customer provided) required to install the access point on a wall consists of:

●Two Phillips pan head self-tapping screws

(ANSI Standard) #6-18 X 0.875in. Type A or AB Self-Tapping screw, or (ANSI Standard Metric) M3.5 X 0.6 X 20mm Type D Self-Tapping screw

●Two wall anchors

●Wall mount template (included on the next page)

●Security cable (optional third part provided accessory)

16 Altitude 4700 Series Access Point Installation Guide