Extreme Networks manual Altitude 4700 Series Access Point Installation Guide

aSelect the Enable LAN Interface checkbox to forward data traffic over the access point LAN connection. The LAN connection is enabled by default.

bUse the This Interface drop-down menu to specify how network address information is defined over the LAN connection. Select DHCP Client to configure the AP to obtain its network information from a DHCP server.

cSelect DHCP Server to configure the access point to provide DHCP services over the LAN connection.

NOTE

Extreme Networks recommends that the WAN and LAN ports should not be configured as DHCP clients at the same time.

dIf the DHCP client option is not enabled, enter the IP Address of the access point.

Altitude 4700 Series Access Point Installation Guide 41