![](/images/new-backgrounds/1263141/26314111x1.webp)
Introduction
CAUTION
Care is required. Disregarding a caution can result in data loss or equipment malfunction.
WARNING!
Indicates a condition or procedure that could result in personal injury or equipment damage.
Warnings
●Read all installation instructions and site survey reports, and verify correct equipment installation before connecting the access point to its power source.
●Remove jewelry and watches before installing this equipment.
●Verify that the unit is grounded before connecting it to the power source.
●Verify that any device connected to this unit is properly wired and grounded.
●Connect all power cords to a properly wired and grounded electrical circuit.
●Verify that the electrical circuits have appropriate overload protection.
●Attach only approved power cords to the device.
●Verify that the power connector and socket are accessible at all times during the operation of the equipment.
●Do not work with power circuits in dimly lit spaces.
●Do not install this equipment or work with its power circuits during thunderstorms or other weather conditions that could cause a power surge.
●Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications.
Site Preparation
●Consult your site survey and network analysis reports to determine specific equipment placement, power drops, and so on.
●Assign installation responsibility to the appropriate personnel.
6 | Altitude 4700 Series Access Point Installation Guide |
|
|