Extreme Networks 4700 manual Above the Ceiling Plenum Installations

Hardware Installation

11Rotate the access point chassis 45 degrees counter-clockwise. The clips click as they fasten to the T-bar.

12The access point is ready to configure. For information on basic access point device configuration, see “Basic 4700 Series Configuration” on page 31.

NOTE

If the access point is utilizing remote management antennas, a wire cover can be used to provide a clean finished look to the installation. Contact Extreme Networks for more information.

Above the Ceiling (Plenum) Installations

An above the ceiling installation requires placing the access point above a suspended ceiling and installing the provided light pipe under the ceiling tile for viewing the rear panel status LEDs of the unit. An above the ceiling installation enables installations compliant with drop ceilings, suspended ceilings and industry standard tiles from .625 to .75 inches thick.

22 Altitude 4700 Series Access Point Installation Guide