NOTE
The AP4700 GE2 port will not be enabled unless a POE power source is used that supplies 802.3at power to the access point's GE1/POE port. Make sure an APPSBIAS1P3AFR model Power Injector is used to ensure 30 WATTS of power is available to enable the WAN port. If a legacy 802.3af power supply is utilized, the GE2 port will not be operational.
aSelect the Enable WAN Interface checkbox to enable the WAN port. Disable this option to effectively isolate the access point’s WAN connection. No connections to a larger network or the Internet will be possible. MUs cannot communicate beyond the configured subnets.
bSelect the This Interface is a DHCP Client checkbox to enable DHCP for the access point WAN connection. This is useful, if the connected network uses DHCP.
Altitude 4700 Series Access Point Installation Guide | 39 |
|
|
