Extron electronic 12800 manual Virtual map and list fields of Virtual Map screen

Figure 3-6 — Virtual map and list fields of Virtual Map screen

Map an unused connector to replace a current connector on the Virtual Map screen as follow:

1.	Click the Edit Mode box to enable mapping.
2.	Click and begin dragging the unused connector. When you start dragging the
	connector, the Virtual I/O Map field moves down the screen to the entry for
	the connector in the list field (figure 3-7).

Figure 3-7 — Dragging and dropping a connector

3. Drop the connector into the Virtual Ins or Outs Map field in the appropriate frame.

The connector on the map from which you dragged turns white to indicate that the connector is now unused. The connector indicator for the location to which you dragged turns pale blue to indicate that it is now part of the virtual plane. The Virtual Ins or Outs Map field entry for the virtual plane that you reassigned changes to reflect the new physical connector for that virtual interface. On the After reassignment view of figure 3-6, the reassigned virtual input 20 green video plane connector is coded 0i127, which translates to BME 0, input connector 127.

Matrix 12800 Switchers • Virtualization/Control Software 3-11