Extron electronic 12800 IptX4@, X4#, IpiX4$, X4%, IpsX4$, IpgX4$, EX4$,X4*,X4&CM IpmX4$,X4*,X4

Programmming Guide, cont’d

Commmand and response table for IP SIS commmands

Commmand	ASCII commmand	Response	Additional
	(host to switcher)	(switcher to host)	description
Set matrix name (location)	EX4)CN}	Ipn•X4)]
Read matrix name (location)	ECN}	X4)]
Reset matrix name to	E•CN}	Ipn•X4!]
factory default
Set GMT time and date	EX4@CT}	IptX4@]
Read GMT time and date	ECT}	X4#]
Set IP address	EX4$CI}	IpiX4$]
Read IP address	ECI}	X4$]
Read hardware address	ECH}	X4%]
Read # of open connections	ECC}	X4^]
Set subnet mask	EX4$CS}	IpsX4$]
Read subnet mask	ECS}	X4$]
Set gateway IP address	EX4$CG}	IpgX4$]
Read gateway IP address	ECG}	X4$]
Set administrator password	EX4&CA}	Ipa•X4&]
Read administrator	ECA}	X4&]
password
Reset (clear) administrator	E•CA}	Ipa•X4&]
password
Set user password	EX4&CU}	Ipu•X4&]
Read user password	ECU}	X4&]
Reset (clear) user password	E•CU}	Ipu•X4&]
Set e-mail server values	EX4$,X4*,X4&CM}	IpmX4$,X4*,X4&]
Read e-mail server values	ECM}	X4$,X4*,X4&]
Set e-mail notifications	EX4(,X5),X5!,X5@ ... X5@CR}
		lprX4(,X5),X5!,X5@ ... X5@]
Read e-mail notification	EX4(CR}	X4(,X5),X5!,X5@ ... X5@]

Special Characters

The HTML language reserves certain characters for specific functions. The switcher does not accept these characters as part of preset names, the name of the switcher, passwords, or locally created file names.

The switcher rejects or Extron does not recommend the following characters: {space (spaces are ok for names)} + } ~ , @ = ‘ [ ] { } < > ’ “ semicolon (;) colon (:) \ and ?.

4-18 Matrix 12800 Switchers • Programming Guide