Extron electronic 12800 manual +X1 P0 SprX1, +X Px! *X@ !...X! *X@ $, @ n

Outputs 3, 4, 5, and 6 are assigned to room 8.

Programmming Guide, cont’d

Commmand and response table for SIS commmands (continued)

Commmand	ASCII commmand	Response	Additional
	(host to switcher)	(switcher to host)	description
Create and recall presets

N • If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.

• If you try to save a preset for a room that has not been created, the matrix switcher responds with the error code E21.

• Outputs must be assigned to a room before a room preset can be created.

• The following characters are invalid or not recommended in preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Save current the current	X(,	SprX(]	Command character is a
configuration as a global			comma.
preset
Example:	9,	Spr09]	Save current ties as preset 9.

Direct write process —

NThe direct write of a global preset should always be preceded by a clear global preset ties command of that same preset number, as shown below. In a directly-written preset, the input tied to each output position (or no tied input) remains unchanged unless overwritten or cleared.

If you do not clear the ties in a global preset number before you directly write a global preset to that number, ties that are part of the previous version of the specified preset with the same number can unexpectedly become part of the newly- created preset.

Clear a global preset ties	E+X1)P0*!}				SprX1)]					Clear all ties in preset X1).
Directly write a global	E+X(PX!*X@!...X!*X@$				SprX(]					You can enter as many
preset										ties as are valid for your
										virtualization. Tie all (!), tie
										RGBHV (&), tie video (%),
										and tie audio ($) commands
										are all valid.
Example:	E+27P0*!}				Spr27]					Clear all ties in preset 27.
										Brackets are shown to separate
		Esc	+27P22*5!15*29$	13*26%3*8&
					Spr27]					ties for clarity only. Create
										global preset 27, which ties
										video and audio input 22 to
										output 5, RGBHV input 15 to
										output 29, video input 13 to
										output 26, and audio input 3
										to output 8.
Recall a global preset	X(.				RprX(]					Command character is a
										period.
Example:	5.				Rpr05]					Recall preset 5, which
										becomes the current
										configuration.
Write room outputs	EX1),X@1,X@2, ... X@nMR}									See notes.
						X1) X@1	,	X@2	, ...	X@n]
					Mpr ,

N• Outputs must be assigned to a room before a room preset can be created.

•A room can contain a maximum of 16 outputs.

•An output can belong to only one room.

•The maximum number of rooms (X1)s) is 32.

•If no room name is assigned, the default name is “Room #X1)•X@1,•X@2,•X@3”.

Example:E8,3,04,5,6MR} Mpr8,003,004,005,006]

N X( = Preset number	01 – 64
X! = Input number	000	– maximum number of inputs (000 = untied)
X@ = Output number	001	– maximum number of outputs
X1) = Room number	00 – 32

4-10 Matrix 12800 Switchers • Programming Guide