Extron electronic 12800 manual Mail Addressee fields, Miles Standish

Virtualization/Control Software, cont’d

Edit any of these password fields as follows:

1.	Click in the desired Password field. The pointer tool becomes a text cursor.
2.	Edit the case-sensitive password as desired.
3.	Press the Tab key on the keyboard or click in another field to exit the
	Password field.
4.	Click the Take button to make the password change take effect.

E-mail Addressee fields

The nine E-mail Addressee fields permit the administrator to identify the e-mail addresses of the personnel to whom the Matrix 12800 e-mails notification of its failure and repair status. The radio buttons and check boxes associated with each address field permit the administrator to specify specific e-mail requirements for each recipient. Figure 3-17 shows a typical e-mail from the switcher.

Miles Standish

From:	Matrix 12800
Sent:	Thursday, May 15, 2003 10:05 AM
To:	Miles Standish
Subject:	Power supply installed

Redundant power supply has been installed in BME 0.

Figure 3-17 — Typical Matrix 12800 e-mail

Edit these fields and controls as follows:

1.	Click in the desired E-mail Addressee field. The graphic cursor becomes a text
	cursor.
2.	Edit the e-mail address as desired. Standard e-mail address conventions
	(nnnnn@xxx.com) apply.
3.	Press the Tab key on the keyboard or click the mouse in another field to exit
	the e-mail addressee field.
4.	In the square check boxes associated with each addressee, select the Matrix
	12800 modules for which the addressee is to be e-mailed.
5.	In the round radio buttons associated with each addressee, select whether the
	addressee is to be e-mailed regarding failures, fixes, both, or not be notified.
	The None radio button is handy for temporarily removing personnel from the
	e-mail list when they are unavailable, such as on travel or vacation.
6.	Click the Take button to make the e-mail address changes take affect.

3-26 Matrix 12800 Switchers • Virtualization/Control Software