Extron electronic GSS 100 manual Selecting an Image to Display, Muting the Video Output

Selecting an Image to Display

NOTES: • The only valid file formats for uploaded image files are BMP and JPG.

• Valid file names are up to 240 alphanumeric characters with no spaces.

• Progressive JPG images are not supported.

• Bitmap (BMP) images must be formatted as 24-bit RGB.

• 1080i and 1080p files need to be mastered at a resolution of 1440 x 1080 instead of the expected 1920 x 1080.

Select an image to display as follows:

1.Press and release the Image button (see figure 8).

Step 1	Step 2	Step 3
IMAGE		TAKE
	ADJUST/
	SELECT
	Select	Loading	Default
	PassThru	Image	Cycle
	or
	Select
	Filename

Figure 8. Selecting an image

2.Rotate the Adjust/Select knob to select either PassThru or one of the previously loaded images by file name.

3.Press and release the Take button. The LCD shows Loading Image and then returns to the default display cycle once the image is loaded.

Muting the Video Output

To toggle the video output mute on and off, press and hold the Take button for approximately 3 seconds (see figure 9). When the video output is muted (video is not output), an asterisk (*) appears and blinks in the LCD default display cycle, in either the output resolution display or the RGB pass-through display. When the video output is unmuted (video is output), the asterisk is not present.

Muting the				Unmuting the
Output				Output
TAKE	3			TAKE	3
	Sec.	Release the			Sec.	Release the
		button.				button.
Press and				Press and
hold.		*1024 x		hold.
						1024 x
		768	@72			768	@72
Default		Asterisk (*)		Default		Asterisk (*)
		blinks to indicate				goes out to indicate
Cycle				Cycle
		the output is muted.				the output is unmuted.
		* RGB				RGB
		PASSTHRU				PASSTHRU

Figure 9. Muting and Unmuting the Output

GSS 100 Graphic Still Store • Operation 9