Extron electronic GSS 100 manual Firmware Upgrade

6.Click the Firmware Upgrade link (see figure 26).

7

10

8

9

Figure 26. Firmware Upgrade

7.Click the Browse button. A Choose File to Upload window appears.

8.Navigate to the folder where you saved the firmware upgrade file. Select the file.

NOTES: • Valid firmware files must have the file extension “.S19.” A file with any

other extension is not a firmware upgrade.

• The original factory-installed firmware is permanently available on the GSS 100. If the attempted firmware upload fails for any reason, the GSS 100 automatically reverts to the factory-installed firmware.

9.Click the Open button.

10.Click the Upload button. The firmware upload to the GSS 100 may take a few minutes. The LCD display on the GSS shows Firmware Upload, then Re-Starting. When the LCD returns to the default display cycle (see “Power-on indications” in the Operation section), the firmware upload is complete.

GSS 100 Graphic Still Store • HTML Control and IPL File Manager 40