Extron electronic GSS 100 manual Resolution submenu, Sync format submenu, Sync polarity submenu

Resolution submenu

Rotate the Adjust/Select knob while in the Resolution submenu to select the resolution of the stored image output. 1024 x 768 at 60 Hz is the default resolution.

NOTE: To view an uncropped full screen image at 1080p or 1080i, the image resolution must be 1440 x 1080.

Resolution	50	60	72	96	100	120
	Hz	Hz	Hz	Hz	Hz	Hz
640 x 480	•	•	•	•	•	•
800 x 600	•	•	•	•	•	•
852 x 480	•	•	•	•	•
1024 x 768	•	•	•	•
1024 x 852	•	•	•	•
1024 x 1024	•	•	•
1280 x 768	•	•
1280 x 800	•	•
1280 x 1024	•	•
1360 x 765	•	•
1365 x 768	•	•
1366 x 768	•	•
1365 x 1024	•	•
1400 x 1050	•	•
1440 x 900	•	•
480p	•	•
576p	•	•
720p	•	•
1080i	•	•
1080p	•	•

Sync format submenu

Rotate the Adjust/Select knob while in the Sync format submenu to select the sync format for the still image output. RGBHV is the default selection.

Sync polarity submenu

Rotate the Adjust/Select knob while in the Sync polarity submenu to select the sync polarity (positive and negative) for the still image output. Horizontal and vertical negative sync are the default selection.

RGB Delay submenu

The GSS can briefly blank the RGB (video) output while it switches between the stored image and the pass-through image. This allows the change in display to appear without a glitch. RGB delay is also known as Triple-Action Switching or video mute switching.

Rotate the Adjust/Select knob while in the RGB Delay submenu to set the delay between 0 and 5 seconds, in 0.1-second increments. No delay (0.0 seconds) is the default setting.

GSS 100 Graphic Still Store • Operation 12