Extron electronic GSS 100 manual Effect submenu, Duration submenu, Output Configuration menu

Effect submenu

Rotate the Adjust/Select knob while in the Effect submenu to cut (immediate switch) and dissolve (the image dissolves from old to new). Cut is the default selection.

Duration submenu

Rotate the Adjust/Select knob while in the Duration submenu to select the duration for the dissolve effect (if it is selected), between 0.0 and 5.0 seconds in 0.1 second increments. The default duration is 1.0 seconds.

Output Configuration menu

Figure 12 is a flowchart that shows an overview of the Output Configuration menu and the available settings.

Power	Default
on	Cycle
	Menu
10
sec.	Switch
	Effect
10	Menu
sec.	Output
	Config
10	Menu
sec.	Slide
	Show
10	Menu
sec.	Advanced
	Menu
10	Menu
sec.	Exit
Menu
	Menu

	Menu		10 sec.		Menu	10 sec.
	1024 x		Next		Sync	Next
	768 @60				RGBHV
	Resolution			Output sync format
Next	See the table			• RGBHV • RGBS
	on page 12.
	Menu		10 sec.		Menu		10 sec.
	H Pol V				RGB Dly		Next
	Neg Neg				0.0 Sec
	Sync polarity				Cut duration
	• H-/V-	•	H+/V-	0.0 to 5.0 seconds in
	• H-/V+	• H+/V+		0.1 second increments.

Figure 12. Output Configuration Submenu

NOTE: The Output Configuration menu settings apply only to the output of still images stored in the GSS; the RGB Pass-through video is output exactly as it is input.

GSS 100 Graphic Still Store • Operation 11