Specifications — SVS 100
Video input and loopout
Number/signal type | 8 composite video, 4 |
|
Connectors | 8 BNC female | composite video |
| 4 | |
Nominal level | 0.7V to 1.0V |
|
Maximum level | 2.0V |
|
Impedance | 75 ohms |
|
Termination | Hi Z |
|
Vertical frequency | 50 Hz to 60 Hz |
|
Video output
Number/type/format | 2 composite video |
|
| 1 |
|
Connectors | 2 BNC female | composite video |
| 1 | |
Nominal level | 0.7V to 1.0V |
|
Impedance | 75 ohms |
|
Sync standards | NTSC, PAL |
|
Audio input
Number/type/format | 4 stereo, balanced/unbalanced | |
Connectors | 4 3.5 mm, | |
Impedance | Unbalanced | 50 kohms, DC coupled |
| Balanced | 25 kohms, DC coupled |
Maximum input level | +19.5dBu (balanced/unbalanced) @ stated %THD+N | |
Input gain adjustment | ||
CMRR | >75dB @ 20 Hz to 20 kHz |
|
Audio throughput
Frequency response | ±0.05dB @ 20 Hz to 20 kHz |
THD + noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive (+19.5dBu |
| input, +21dBu output, balanced/unbalanced) |
S/N | >90dB, output +21dBu, balanced |
Adjacent input crosstalk | >80dB @ 1 kHz |
Stereo channel separation | >80dB @ 1 kHz |
Audio output
Number/type | 1 stereo, balanced/unbalanced | |
Connectors | 1 3.5 mm, | |
Gain | Unbalanced | 0dB |
| Balanced | +6dB |
Impedance | 50 ohms, unbalanced; 100 ohms, balanced | |
Gain error | ±0.1dB channel to channel |
|
Drive | > +21dBu, balanced @ stated %THD+N | |
Drive (600 ohm) | > +15dBu, balanced @ stated %THD+N | |
Control/Remote
Serial control port | |
Baud rate and protocol | 9600, |
Pin configurations | 2 = TX |
| 3 = RX |
| 5 = GND |
