Extron electronic TPS150 manual 2 - Projector mounting the receiver

3.	Insert the transmitter into the rack, aligning the holes in the mounting bracket
	with those of the rack.
4.	Secure the transmitter to the rack using the supplied machine screws.

Projector mounting the receiver

If desired, projector mount the receiver as follows:

1.	Remove the rubber feet from the bottom of the receiver.
2.	Attach the supplied 992547-2 projector pole mounting bracket to the receiver
	with the four provided #8 machine screws.
3.	Place a locally-obtained U-bolt around the projector pole and through the
	slotted holes in the bracket (figure 2-2). Secure the bracket in place with
	locally-obtained bolts.

Projector Mounting

Bracket

TPR150

Figure 2-2 — Projector mounting the receiver

TPS150 Switching and Transmission System • Installation 2-3