Extron electronic TPS150 manual Command Ascii Command Response Additional description, Addressing

Serial Communications, cont’d

Command/response table for programming and operating the TPT150

Command

ASCII Command

Response

Additional description

(host to TPT150)

(TPT150 to host)

Addressing

Connect

[CC

X1

]

{none}

Connect the host computer to the

addressed unit. This command

is case sensitive.

Change address number

[ADDR

]

[R0•

•ADDR

•]

Change the TPT150’s address to

X1

X1

X1

and the displays to

+1.

X1

X1

Example:

[ADDR95]

[R0•95•ADDR95•]

Change the transmitter’s address

number to 95 and the display’s to

96.

Reset address to factory default

[ADDR@]

[R0•

X1

•ADDR@•]

Reset the TPT150’s and display’s

addresses to the factory defaults

(97 and 98 [97 +1]).

Input selection

Select an input

[CH

X2

]

[R0•

X1

•CH

X2

•]

Select input

X2

to transmit to the

receiver and output to the

display.

Increment input selection

[CH+]

[R0•

•CH+•]

Select the next higher input to

X1

transmit to the receiver and

output to the display. If you

send this command when input 4

is selected, the transmitter wraps

around to select input 1.

Decrement input selection

[CH–]

[R0•

X1

•CH–•]

Select the next lower input to

transmit to the receiver and

output to the display. If you

send this command when input 1

is selected, the transmitter wraps

around to select input 4.

Query input selection

[CH?]

[R0•

•CH?•

]

Input

is selected.

X1

X2

X2

Blanking and muting

Blank the output

[BLANK1]

[R0•

X1

•BLANK1•]

Mute the output video.

Unblank the output

[BLANK0]

[R0•

•BLANK0•]

Unmute the output video.

X1

Toggle the blank status

[BLANK]

[R0•

X1

•BLANK•]

Toggle the audio mute on and off.

Mute the output

[MUTE011]

[R0•

•MUTE011•]

Mute the output audio.

X1

Unmute the output

[MUTE010]

[R0•

X1

•MUTE010•]

Unmute the output audio.

Toggle the mute status

[MUTE]

[R0•

•MUTE•]

Toggle (change the state of) the

X1

audio mute).

Query mute status

[MUTE01?]

[R0•

X1

•MUTE01?•

X3

]

The audio output is

X3

(0 = off [audio unmuted],

1 = on [audio muted]).

4-14 TPS150 Switching and Transmission System • Serial Communications