Extron electronic TPS150 manual About the TPR150 receiver

The audio for the selected input is output locally. It is not sent to the receiver.

The TPT150 has an RS-232 port that accepts ICS100 program control from a connected computer or serial command control from a computer or control system. The transmitter can also store serial commands that are entered by the operator. The transmitter sends the appropriate serial commands on the TP link to the receiver whenever an input button or the projector power button is pressed.

An optional CTP150CM control panel can be connected to a contact closure port on the TPT150. Using the CTP150CM, a remote operator can select inputs, power up and down a projector connected to the receiver, and increase and decrease the output volume.

Extron

TPR150	Control
Twisted Pair	System
Receiver
	Extron
	CTP150CM
	Control
	Panel
	TP
	Cable
Extron	Sound
TPT150	System
AV Switcher

	VCR	DVD
		Component
	Composite	Video
	Video	Input 4
	Input 3
PC
	Laptop
Input 1
	Input 2

Figure 1-1 — Typical TPS150 Switching and Transmission System application

About the TPR150 receiver

The TPR150 receiver accepts the TP link from the transmitter and outputs the received video and RS-232 commands. The receiver outputs the following signals on the following connectors:

•High-resolution RGB video on one female 15-pin HD connector

•Component video (Y, R-Y, B-Y) on three female RCA connectors

•S-videoon one female 4-pin mini DIN connector

•Composite video on one female RCA connector

•Serial (RS-232) commands on one male DB9 connector

TPS150 Switching and Transmission System • Introduction 1-3