Extron electronic TPS150 ASCII Command, Response, Additional description, Front panel lockout

Command/response table for programming and operating the TPT150 (Cont’d)

Command	ASCII Command			Response							Additional description
	(host to switcher)			(switcher to host)
Front panel lockout
Disable front panel	[FP0]			[R0•	X1	•FP0•]					Disable the transmitter’s buttons.
Enable front panel (default)	[FP1]			[R0•		•FP1•]					Enable transmitter’s buttons.
					X1
Toggle front panel lockout	[FP]			[R0•	X1	•FP•]					Toggle front panel status
											(enabled-to-disabled or disabled-
											to-enabled).
View front panel lockout	[FP?]			[R0•		•FP?•			]		0 = front panel off, 1 = on.
					X1		X3
Transmitter reset
Reset transmitter	[DFLT		]	{none}							0 = reset serial port settings and
		X16
											addresses without deleting input
											button codes, projector power
											codes, input audio level, and
											volume.
											1 = factory reset, including input
											codes, projector power codes,
											input audio levels, and volume
											level.
Architectural information
View architectural information	[ARC]			[R0•	X1	•ARC•		X17		]	Display the transmitter model,
											revision, and connection
											information.

TPS150 Switching and Transmission System • Serial Communications 4-17