Extron electronic TPS150 TP Cable Termination, 8 - TP cable termination, Installation, cont’d

Installation, cont’d

TP Cable Termination

RJ-45 termination must comply with the TIA/EIA T 568A or TIA/EIA T 568B wiring standards for all connections.

The TPS150 works with either shielded or unshielded cables. However, to comply with FCC rules, shielded (STP or FTP) cables must be used.

Figure 2-8 details the recommended termination of CAT 5/5e/6 TP cable with RJ-45 connectors in accordance with the TIA/EIA T 568A or TIA/EIA T 568B wiring standards. You can use either standard, but ensure that you use the same standard on both ends of the cable.

Side		Clip Down				Pin	568 A	568 B	RGB video	Component video
	Pins 1 23 4 5 6 7 8			RJ-45			Wire color	Wire color	signals	signals
				connector		1	White-green	White-orange	Blue +/V. sync +	B-Y +
						2	Green	Orange	Blue –/V. sync –	B-Y –
						3	White-orange	White-green	RS-232 +	RS-232 +
						4	Blue	Blue	Green +/H. sync +	Y +
						5	White-blue	White-blue	Green –/H. sync –	Y –
						6	Orange	Green	RS-232 –	RS-232 –
						7	White-brown	White-brown	Red –	R-Y –
						8	Brown	Brown	Red +	R-Y +
		1 2 3 4 5 6 7 8
							568 A	568 B	S-video signals	Composite video
						Pin	Wire color	Wire color		signals
						1	White-green	White-orange
						2	Green	Orange
						3	White-orange	White-green	RS-232 +	RS-232 +
					Twisted	4	Blue	Blue	Y +	Video +
					Pairs	5	White-blue	White-blue	Y –	Video –
1&2			7&8			6	Orange	Green	RS-232 –	RS-232 –
		3&6 4&5				7	White-brown	White-brown	C –
						8	Brown	Brown	C +

Figure 2-8 — TP cable termination

2-8 TPS150 Switching and Transmission System • Installation