Connecting the Power Cable
CAUTION
•Use a power supply that is separate from devices that produce electrical noise.
•Don't have multiple connections on the power cord. These will cause heating and fire. Take power directly from a household power outlet.
•An earth lead must be used.
NOTE
•Value settings will be recorded after the power switch has been turned off. Wait for about 5 seconds before switching on again.
Plug the power cable into the power socket on the left side at the back of the printer and insert the power plug into a power outlet that matches the following power supply specifications.
Power Supply Specifications
Voltage | 100 to 120 V AC ±10%, 200 to 240 V AC ±10% |
Frequency | 50/60 Hz ±1 Hz |
Capacity | Use a power outlet rated for at least 10 A |
Back of Board Box
Power Cable
Printing for Preparing
31 |