Falcon RJ-6000 Series To Receive Data from the Computer, Input Port, Online Set-up

To Receive Data from the Computer

First, prepare the printer to receive data from the computer. The conditions for connecting the printer and computer must be aligned beforehand on the printer side and on the computer side. This is called set-up.

The basic printer set-up for receiving data from a computer involves the following four types of settings.

Command Settings	Specifies the type of online com-
	mands
Setting the Position to Start Writing	Selects the position (initial position)
	to begin writing after the printing
	media has been mounted
Centronics Settings	Settings related to the Centronics
	interface (IEEE1284 compatible,
	Nibble, ECP)
Network Settings	Specified if an optional network inter-
	face (Ethernet) is to be used.

Input Port

Input port means the type of interface port. RJ-6000 Series input ports are set as follows.

Input Port Type of Interface

Port 1 Centronics (IEEE1284 compatible, Nibble, ECP)

Port 2 Option board (empty)

Online Set-up

There are two types of online-related settings: Centronics settings with respect to the computer and Centronics connection, and network settings with respect to the computer and network connection.

Settings at the time of shipping by Mutoh

Centronics Settings Network Settings (option: empty)

Mode Bitronics

IP address 192.034.043.015

Timing AB system

Printing for Preparing

RJ-6000 Series USER GUIDE Basic Edition 49