Cleaning the Printer

IMPORTANT

Dust and scraps of paper tend to accumulate over time on the platen and cutter groove. This leads to poor quality printing and cutting.

Use a soft damp cloth to wipe away any paper scraps clinging to the pressure roller.

Clean the drive roller with a nylon brush.

Brush

Drive Roller

IMPORTANT

Paper scraps on the pressure roller and drive roller may pre- vent the media from feeding properly and produce a "Jam check error".

Use a cotton swab to clean dust and paper scraps from the cover of the media sensor at the rear.

Bend the swab as shown in the diagram.

Media Sensor Cover

Maintenance Daily

RJ-6000 Series USER GUIDE Basic Edition

77