Making a Test Print
Make a test print to verify that the printer is working properly.
Step 1
Open the cover and check that the hold lever is up.
Step 2
Press the [MEDIA] key to light the Sheet media LED. (Cut media is selected)
printtest your Paste |
Step 3
Load an A3 size sheet of cut media and put the hold lever down.
Step 4
After initialization has finished, press the [Test Print] key (RESOLUTION, VALUE key) while you are pressing the [shift] key. (Test print: pale blue)
P l o t O K
P r i n t i n g
bordered this on | Preparing |
Test print sample (paste your test print on this page)
NOTE
• If you are unable to make a test print like the above sample, contact your local Mutoh dealer.
Paste | Printing for |
bordered this on print test your |
|
47 |