Loading the Media
Loading Roll Media
* If the roll media must be moved to the left
Turn the scroller adjusting screw at the rear left side of the printer to the right
Scroller Adjusting
Screw
When moving the roll media to the left
IMPORTANT
•The guide line (holes) is a guide
There is a possibility of a media jam if the pressure roller is not holding the left edge of the media and the pressure roller is near the right edge. Either hold the left edge of the media com- pletely with the pressure roller or slide it so that pressure roller is about 5 mm away from the right edge of the media and the right edge of the media is within 5 mm to the left or right of the guide line (holes).
44 |