Replacing Ink Cartridges

If the RJ-6000 is displaying "No ink" or "No cartridge", the ink cartridge should be replaced or inserted without delay. If "Ink low" is displayed, have a replacement cartridge ready.

Step 1

If "No ink" is displayed in the message display section, from the back, pull out the ink cartridge for the color that is shown to be not printing. For example, if black ink has run out,

[

K ] N e a r E n d

pull out the black ink cartridge.

[

K ] C a r t r i d g e

Step 2

Open the new ink cartridge package.

NOTE

•Only genuine ink cartridges can be used. They also need to be turned in the proper direction for insertion. Make sure not to confuse the direction and place for insertion.

•Open the ink cartridge just before you load it into the slot. Printing may be blurred if the ink cartridge is left open for a long time.

•Ink cartridges should be used within two years of the date that is printed on the package. Cartridges that have been loaded into the printer should be replaced within six months.

Step 3

Insert the new cartridge in the slot at the back of the printer.

Step 4

Check that the permanent message has been restored in message display section.

P l o t O K

Maintenance Daily

RJ-6000 Series USER GUIDE Basic Edition

79