Switching Inks
A washing set that is separately sold is required in order to change the type of inks used in the
Ink switching involves switching light cyan and light magenta for orange and green pigment inks or interchanging pigment inks and dye inks.
Step 1
Remove the currently loaded ink cartridges from the back and insert the washing set.
Step 2
Carry out washing by referring to the "Utility Settings: Head Wash" item on page 72 of the Functions Edition of the User Guide.
Step 3
After washing has finished, insert the required type of ink cartridges.
NOTE
•Switching is not possible unless all six inks are of the same type
•Only genuine ink cartridges can be used. They also need to be turned in the proper direction for insertion. Make sure not to confuse the direction and place for insertion.
•Open the ink cartridge just before you load it into the slot. Printing may be blurred if the ink cartridge is left open for a long time.
•Ink cartridges should be used within two years of the date that is printed on the package. Cartridges that have been loaded into the printer should be replaced within six months.
Step 4 |
|
Ink filling operations begin. | 1 M |
I n k R e f i l l |
80 |