Loading the Media
Loading Roll Media
Loading Roll Media
Step 1
Open the cover, check that head is in a position where it will not touch the media keeper blade and put the hold lever up.
Step 2 Selecting media type |
|
|
|
| |
Press the [MEDIA] key on the Control |
|
|
| : Lit | |
panel to light the Roll media LED. |
|
|
|
| |
|
|
|
| : Not lit | |
Step 3 |
|
|
| ||
|
|
| |||
|
|
|
| ||
Take out a roll of media. |
|
|
|
| |
Step 4 |
|
|
|
| |
Remove the movable flange from the |
|
|
|
| |
scroller. |
|
|
|
| |
Movable Flange
Step 5 Loading roll media on the scroller
Turn the roll media as shown in the diagram and pass it over the scroller until the media tube fits firmly over the fixed flange. Replace the movable flange on the scroller and fit it firmly into the media tube.
Fixed | Media | |
winding | ||
Flange | ||
direction | ||
|
Printing for Preparing
41 |