Media Feed
If roll media is being used, the media will be fed in the normal direction while the [Shift] key and [Media Feed] key are pressed. Roll media will not be fed while data is being received or processed. Media is not fed while cut media is in use.
Step 1
The media feed function can be used only when roll media is loaded and data is not being received.
Step 2
Feed roll media by pressing the [Media Feed] key (MENU, Menu Down key) while you are pressing the [Shift] key.
Step 3
Release the [Shift] key and [Media Feed] key (MENU, Menu Down key) when the roll media has been fed to the desired position.
NOTE
•If the printing surface of the roll media that is to be used for printing is dirty, press the [Media Feed] key (MENU, Menu Down key) while pressing the [Shift] key to feed the media until the printing surface is clean. Then use the [CANCEL] key to cut off the dirty media.
Keys Access Direct
67 |